Toolbox Fittings

Please consider this fittings guide when planning your lampshade design. We really are bespoke so we have the facilities and expertise to replicate, remake and refurbish practically all sizes and styles of lampshades. If in doubt take some photographs of example lampshades. We can discuss these with you and confirm the dimensions we need.

Fittings

Candle Clip

Can be set straight across the top or dropped down as required. Please specify your preferred drop.

Fittings Guide Lampshade Fitting

Used with US harps or a US finial rod system. The fitting on the lampshade is often set straight across or dropped down by a little. Please specify.

Fittings Guide Ceiling Lampshade

Washers can be 42mm (ES), 28mm (BC or SES) or 20mm (SBC). Please stipulate how low you would like the washer to be set.

Fittings Guide Fixed Lampshade

Wired from the top. Washers can be 42mm (ES), 28mm (BC or SES) or 20mm (SBC). Please stipulate how high you would like the washer to be set.

Fittings Guide Base Lampshade

Washers can be 42mm (ES), 28mm (BC or SES) or 20mm (SBC). Stipulate how high you need the washer to be set.

Fittings Guide Duplex Lampshade
Duplex

Carrier for Lampshades

Carrier

Use the carrier with the duplex fitting. Carriers come with either a 42mm (ES) washer or a 28mm (BC) washer.

Washers

Finial Fitting

10mm Internal Diameter

Small Bayonet Cap for Lampshades

20mm Internal Diameter

British Standard Edison Screw

28mm Internal Diameter

European Edison Screw for Lampshades

42mm Internal Diameter