Please consider this fittings guide to planning your lampshade. We really are bespoke so we have the facilities and expertise to replicate, remake and refurbish all practical sizes and styles of lampshades. If in doubt take some photographs. We can discuss these with you and confirm the dimensions we need.
Top Fitting / Ceiling Pendant
Washers can be 42mm (ES), 28mm (BC or SES) or 20mm (SBC). Please stipulate how low you would like the washer to be set.
Used with a shade carrier.
Wired from the top. Washers can be 42mm (ES), 28mm (BC or SES) or 20mm (SBC). Please stipulate how high you would like the washer to be set.
Washers can be 42mm (ES), 28mm (BC or SES) or 20mm (SBC). Please stipulate how high you would like the washer to be set.
This is used with US harps or a US finial rod system. The fitting on the lampshade is often set straight across or dropped down by a little. Please specify.
Candle Clip Fitting
Can be set straight across the top or dropped down as required. Please specify.
Use shade with duplex fittings. Carriers come with either a 42mm (ES) washer or a 28mm (BC) washer.
FINIAL (US Fitting)
10mm Internal Diameter
SBC (Small Bayonet Cap)
20mm Internal Diameter
BC (Bayonet Cap) or
SES (Small Edison Screw)
28mm Internal Diameter
ES (Edison Screw / European Standard)
42mm Internal Diameter